Log In  

BBS > Community Superblog
All | Following | GIFs | Off-site

Hello! This is my first post. I'm going to be documenting the making of my small platformer game Mushroom Hero. I was up late last night programming player movement and I think it's a pretty good base that I can build upon later. Here's my little mush sprites:

So far I have running, jumping and sliding movements along with the appropriate sprite animations.

2
2 comments


Cart #broquaint_voidseeker-1 | 2021-02-25 | Code ▽ | Embed ▽ | No License
5

Void Seeker

You wish to become one with the void, but you're running out of time—you need to fall through the gaps on each floor and make it to the void before it closes. The deeper you go the sooner the void closes and the path becomes more challenging, but fortunately you'll have some power ups along the way. The goal of the game is to get to the deepest level as the void has no end.

Controls

⬅️➡️ - Movement
❎ - Jump/Start/retry

Features

  • The void is rife with randomness—no two levels are the same!
  • Spiffy sound effects, they'll never get old
  • High score tracking, your PB is displayed on the start screen

Gaps

  • Normal (grey) — Fall at regular speed
  • Fast (green) — Fall fast then move
  • Slow (purple) — Fall slow then move slow, less so if you jump in

When falling from one gap if you go through another that will speed your fall and give you a speed boost on landing!

Items

  • Key — Get all the keys on the floor to unlock the gaps
  • Time extend — The void lingers a little longer

Power ups

As you wish to travel light you can only hold one power–up a time, but fortunately they aren't uncommon in your journey.

  • Warp — Walls lose all meaning
  • Grav Belt — More jumps and improved slow descents
  • Speed shoes — Move faster, stop slower

Obstacles

  • Launcher — Gives you boost … back up a floor
  • Bouncer — Gives you a little push

Game Jam

This is an entry for the inaugural

[ Continue Reading.. ]

5
4 comments


Cart #dohifisoni-2 | 2021-02-17 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
1

Hi, this is my first ever game on any platform, ever!

Use arrow keys to move.
Press the Z key to send love to Pablo, gift subs, and bits.
Press the X key to throw poop on Jad, gnome child, and mayo.

Score goes up if you send/throw the correct thing. Otherwise it'll go down!

Game ends when something hits the crumby desk.

1
0 comments


Cart #picamor-0 | 2021-02-16 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
34

Picamor is Dating Hell! Dodge awkward beams, collect tiny hearts and stay in the cool blue flow to win your date's affection or risk breaking their heart...

If you enjoy our little game let us know, and consider supporting it on itch.io

dinoware is a collective of tiny dinosaurs. In alphabetical order:

  • Amysaurus: Pixel artist extraordinaire
  • Galenmereth: Programming and game design
  • Gruber: Composer of wicked pico8 tunes
  • Himitsu: Tamer and advisor, QA
34
4 comments


Cart #loderunnerce-0 | 2021-02-16 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
12

50 (plus 1) of the most challenging lode runner levels!

WARNING: some levels are untested. The following are definitely achievable: 1, 3, 4, 5, 14, 15, 18, 32

Controls

[Z] and [X] dig
Hold [X] if you get stuck to restart level
[Q] to quit back to titles

Thanks To

Finn for testing
Doug Smith for creating the 1983 classic
Mike Dailly for creating the original lemmings sprites
Zep for the confetti tweetcart I used for the game complete scene
PICO-8 for creating an awesome "fantasy console"

Minified using the GEM Minifier:
https://pahammond.itch.io/gem-minify

Unminified code can be downloaded from:
https://pahammond.itch.io/lode-runner-ce

12
2 comments


Cart #stormyp8_bugzapper-0 | 2021-02-16 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA

Use your lazor to kill the infection (orange fuzzy cells) before it overruns your healthy ones (blue).

arrows: move aim
O: cycles lazor power from 1-5
X: FIRE LAZOR

Next version of this should have proper end game states

0 comments


So, I wanted to do a quick experiment to see what happened if you played a note on a custom SFX instrument with reverb - would the reverb continue past the line where the note is played? would it cut off? Either would definitely be cool.

So I made a test cart:

Cart #dezapemiyi-0 | 2021-02-15 | Code ▽ | Embed ▽ | No License

...and did an export command from the command line to save a .wav of SFX 1 to open in Audacity, and PICO-8 immediately crashed.

It looks like it's an issue with SFX that contain custom SFX instruments, from my very quick testing.

Edit: I haven't noticed this error at any point recently; I'm going to chalk it up to gremlins and resolve the report.

0 comments


Hey All! PICO-8 0.2.2 is now up on lexaloffle, Humble, itch.io, and for PocketCHIP.

This release follows a pattern set by previous 0.2.* updates in that I set out to fix a bunch of bugs and resolve design details, but in doing so, went down some deep rabbit holes and came out the other end with brand new features. As a result, some of the new features are on the advanced side, and this post will be likewise be more technical than usual. But I hope everyone can find something fun to mess around with!

SFX Filters

At the bottom of the SFX editor, you can now find 5 switches that alter the characteristics of each instrument. You can get a much wider variety of sounds and textures now, but they're meant to feel like variations on the existing instruments rather than completely new ones. I settled on this scheme after working on Voxatron's sound system and found that I could boil the set of parameters I wanted down to just 7 bits of information -- which is fortunate because there were only 7 unused bits left in the SFX data!

[ Continue Reading.. ]

62
33 comments


What happens when time () reaches its limit?
Can a pico-8 game run longer than 32,767 (9h 6m)?

1 comment


This is with the current latest release v0.2.2 on macOS 11.2.1 (if that's relevant):

If I try to export a sprite sheet, then modify it in an external program, then import it, I get a "could not load" error message. It also doesn't seem to matter whether I modify it externally, since export sprites.png and then import sprites.png shows the same error. Nothing seems to be logged to stdout or stderr.

1
3 comments


Been seeing some amazing things in Pico-8 lately and want to try my hand at some basic 3d. Can someone point me in the right direction for learning?
Thanks! <3

1 comment


Cart #sitelenpona-1 | 2021-02-15 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
14

Continuing my topic of custom fonts, here's one that replaces almost every character in the later half of the character set (which is usually taken by patterns, hiragana and katakana) with the 120 official characters of the "sitelen pona" writing system for the minimalist conlang "toki pona".

Here's the charts of characters:

Changelog:

Version 1.1 (current):

  • slight adjustments to some characters, an easier-to-understand "moli"

Version 1.0:


Cart #sitelenpona-0 | 2021-02-15 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
14


[ Continue Reading.. ]

14
11 comments


Cart #supervolcanodemo_v1-1 | 2021-02-15 | Code ▽ | Embed ▽ | No License

This is a demo for a game I did for class which I hope to expand on in my free time, when I actually have some of that again lol.

You play as the volcano god of an island city. When foreign ships carrying missionaries of another god arrive at your shores and convince the villagers to convert and stop their worship of you, you get revenge by destroying the city with your fireballs.

X to fire a shot
Goal is to destroy as much as you can in 10 shots
Some areas give more points than others

0 comments


Cart #zopowunida-0 | 2021-02-15 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
2

finally finished something, the basics were made in one day, prob 5 hours, then kept adding effects and sound, planning on adding transitions with dithering!

2
1 comment


Cart #font_mapper-4 | 2023-08-25 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
3

Here's a cart I threw together for myself to use with the new custom font feature.

When run it will read the spritesheet into memory as a custom font, then copy a code snippet to your clipboard that will import that font into another cart. It doesn't include the values from 0x5f60->0x5f64, that define the overall font attributes. Those must be set manually in the cart you are importing to.

The import has several optimisations. Instead of always copying the entire custom font memory block it starts from the first non-zero memory value in the block and continue to the last. To save characters it will construct two exports: one that uses poke and one that uses poke4 and export whichever is smaller. It will leave out unnecessary zeroes and also trim leading and trailing zeroes in the hex values for the poke4 export. It also stores all the values as a big string that's split and unpacked at runtime to save tokens.

[ Continue Reading.. ]

3
2 comments


Cart #jakeymaths-0 | 2021-02-14 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
3

Just testing...

Jakey using Pico 8 to do his homework. It's more fun than pencil and paper!

3
1 comment


Cart #fishing_grounds-1 | 2021-02-15 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA


I just completed my first Pico-8 Game.
Event was a local (online) GameJam-Project (8 hours to create a game from scratch, theme was "Sailing"). Thing is, I've never touched Pico-8 before, nor had I any Lua Experience whatsoever, but I wanted a challenge and (kinda) succeeded; fiddling with the Pico-8 Engine was tons of fun, and I certainly will continue my Pico-8-Endeavours in the future.
The following day I tweaked my code and added fancy stuff, like, a Scoring Objective.

Use [Arrow Keys] to navigate the Ship.
Press [X] and any direction to throw out your fishing rod.
Catch as many Fish as you can without crashing your Ship.

The Moving Fish scores 1 Point, the Stationary Fish 3 Points, but it will disappear after a few seconds, so you gotta be fast. A new Stationary Fish only spawns after you've caught the Moving Fish.

[ Continue Reading.. ]

2 comments


Cart #rusfont-0 | 2021-02-14 | Code ▽ | Embed ▽ | License: CC4-BY-NC-SA
10

This cartridge uses the PICO-8 v0.2.2's custom font functionality to provide an additional font with Russian letters (with the exception of Ё).

The characters are mapped similarly to the KOI8-R encoding, so that similar Latin characters are mapped to similar Russian ones. For example, "РУССКИЙ ТЕКСТ" (Russian text) is encoded as "RUSSKIJ TEKST".

To use the font, just copy the "setfont" function into your program, call it at the start of the program, and use the commands to switch to the custom font and back whenever you need to print Russian characters.

For example, this line will output "привет, мир! pico-8 пишет по-русски!" ("hello world! pico-8 is writing in russian!")

[ Continue Reading.. ]

10
6 comments


Cart #tic_tac_toe-0 | 2021-02-14 | Code ▽ | Embed ▽ | No License
2

2
0 comments


I am looking for any kind of intercom to or from an exported binary.
I guess the clipboard is not practical because of the constraint (CTRL + V).
But maybe using files (R / W) or pipes. Maybe if the cartridge is invoked by a parent process, it could write to the STDOUT?

I am looking for any type of suggestion (even the most exoteric).

1
1 comment




Top    Load More Posts ->