Welcome to Pico Sequence! It's a tiny 4-step sequencer with 4 sounds.
Each row represents a different sound.
1- kick drum
2- snare/hi-hat
3- synth 1
4- synth 2
To play/pause the sequence press play button on the sequencer using mouse or just press space.
You may also switch steps using left and right arrow keys while the sequence is not playing.
Use up and down arrow keys to change the speed of the sequence.
The mixer is on the upped part of the sequencer. You may change the volume of each sound by dragging the faders up and down.
You may also change the decay of the kick and the snare/hi-hats by hovering you mouse over the speaker(kick) or the noise screen(snare/hi-hats) and pressing left and right arrow keys.
Sound 3 is represented with the green head. If you press the head, an eye icon appears and the random melody mode turns on. It plays notes from the sequence randomly in minor scale.
Sound 4 is a head with the yellow orb. If you press the orb and drag it up and down, the note changes in 1 octave range. The note of sound 4 determines the root note of sound 3 minor scale.
Four buttons on the side of the sequencer switches the amount of steps for each sound between 3 and 4.
To record your sequence press the tape icon on the top right corner of the screen. Press it again to finish the recording.
UPDATE #1
- Now the BPM are real beats per minute, so you can actually sync Pico Sequence with some other sequencers or DAW. It will still be a bit wobbly, but I added a speed adjustment feature. Pressing right or left arrow while playing a sequence will speed it up or down.
- The fourth instruments note can now be written to the sequencer steps. To do that, change the orb position and if the step is on, the position will be recorded to the step. You may do it both while sequence is playing or paused.
5 comments
This is a reskin/mod of "BAS" by @yokozuna, with new yoshi and piranha plant graphics and some yoshi music. Have fun :)
6 comments
Can you draw a nicely round circle?
- Use the left mouse button or x to draw
- And the right or c to clear what you have drawn.
- You determinate the radius by placing the first dot.
- If you look closely there is a help circle to help you.
- You cant have the circle too close to the middle
Have fun and comment your score :)
10 comments
Cyber-Santa comes to the Cybercity to give gifts to bad guys!
Z: Throw a gift
X: Sandevistan(Slows time)
[Enemies]
Gang: Shoot bullets
Net hacker: hack of your eye device
You can lock on enemies as you get closer to them.
If you hit the enemy's bullet, you lose five gifts.
You give or lose all of your gifts to finish the game.
ENJOY!
3 comments
A wee game for the the 2023 Holiday Bundle: https://www.lexaloffle.com/bbs/?tid=55407
It is 2 player, but if you'd like to play around with both teams, you can enable 'hotseat' mode in the pause menu which allows using the same controls for both teams.
The goal is to get as many curling stones inside or even barely touching the red (5 points) and blue (2 points) circles, counted at the end of the match. Each elf is assigned a fixed amount of time to do whatever they like, including jumping on stones, riding them around, and pushing around the opponents' curling stones or players.
There are no points awarded for having elves in the circles at the end of the match -- it is just about the stones, for a maximum of 15 points. The last elf has the last-move advantage, but only 7 seconds instead of 10. The first 2 elves get 15 seconds each. Players can decide who goes first with a game of real-world rock paper scissors, and the first player to press X goes first.
1 comment
I've been working on a table to binary converter that can help compress data and store it in cart rom. I know there have been different attempts in the past, but this version aims to fit only the necessary data and leaves the types to a format string. Though it's only really useful if you have some of the following.
- A lot of data in tables
- A consistent and known table format
- A variety of table formats
- Multiple carts
It works by taking in a table, a writing address, and a format, that generally look like this
tab = {1,2}
form = "[#8,#8]" -- an indexed array of 2 unsigned 8-bit integers
-- form = "[#4,#3]" -- also works with a different number of bits (up to 16)
[ [size=16][color=#ffaabb] [ Continue Reading.. ] [/color][/size] ](/bbs/?pid=139161#p) |
0 comments
As my first game, I created this one related to Christmas. I hope you enjoy it. Merry Christmas!
Operation
Circle/z button: Confirm
In game
Left/right directional key: Move
HINT:Santa gets hit only on his boots.
1 comment
A Celeste Classic mod where you play as the knight from Hollow Knight. Swing your nail to bounce your way through obstacles and free all the grubs! Collaboration with @Sparky99
11 comments
I recreated the Card Flip minigame from the Goldenrod game corner in Pokemon Gold, Silver and Crystal.
It should play just like the official minigame although, instead of paying 3 coins to play, you start with a balance of 1 coin that doubles as your score.
0 comments
It's just before Christmas, and Santa needs to know...
WHO TOOK THE BOOKS?
This is the sequel game to WHO STOLE THE COAL? - a Pico-8 holiday game from Dec 2020.
A LONG LOST, UNRELEASED GAME!
There was a video game crash, with tons of unsold/unreleased cartridges for the ATOMI 3600 console being buried in the desert in 1983.
Years later in 2014, they were excavated. Amongst the cartridges was a finished sequel to WHO STOLE THE COAL?, which was the original immensely popular game when released. But by the time WHO TOOK THE BOOKS? was finished, the market has collapsed, and it never saw the light of day.
But ATOMI rose from the ashes, recently releasing the ATOMI 3600+, and on it, WHO TOOK THE BOOKS? finally got released to the public. Game players and historians rejoiced!
51 comments
.jpeg)
have fun!
this is all so far because idk how to make the camera follow you on the y axis
0 comments
a cozy lill' walk through some snowy woods
this game is mostly about atmosphere, so no objectives here. just walk around till you feel done :)
the trees
i'm real happy about how natural the tree generation feels so i figured i'd talk about it.
the trees start out like this.
the main thing that helps sell the forest is the random tree placement. but if we just did something like..
tree.x = x + RND(8) - RND(8) tree.y = y + RND(8) - RND(8) |
..then each time we re-spawn the trees for a area they would be in different spots then before. basically we need a function that returns a sudo random value y from value x. thats were this function comes in...
3 comments
v1.1, by nayz
A fully-featured port of Minesweeper to PICO-8
PICOSWEEPER is something I've worked on for a little while, and has lots of options and customization, plus some quality of life features. This is the biggest project I've worked on yet (baby steps), so I hope you enjoy!
Don't hesitate to give me any feedback, and please let me know if you find any bugs. Thanks for playing!
1 comment
