Dear users,
I've watch tutorials about creating a selfcontained PICO-8 desktop by using raspberry pi zero and raspberry pi 3. :-) I've tried to use the same procedure on my raspberry pi zero 2 W, but it won't work. And since I haven't succeeded to find tutorials about that subject by using a raspberry pi zero 2 W, I hope some of U can help.
-Does anyone have any suggesting how to make it work on a raspberry pi zero 2 W?
Kind regards
Johnny
For my selfcontained PICO-8 desktop, I used the following instruction:
https://github.com/anthonycaccese/pico8-desktop-console
(without the screen script, since I'll use an external monitor).
It worked on my raspberry pi 3, but unfortunately it broked down because of a bad PSU connector on the Rpi3 board. But I've also have the Rpi zero 2 W, so I thought I would try it out.
After I've followed the instruction U can see in the link above, nothing happens. It just freezes when the splash-screen appears. No errors no nothing. I've tried diffent SD-cards..., but no change.
Kind regards
Johnny
Do you just want the Pi to boot and go straight to PICO-8 without using a desktop environment? If so, I just wrote a guide! https://www.lexaloffle.com/bbs/?tid=140366
I followed Ur guide step-by-step, and I think it¨s was very easy eventhough I'm far from a Linux expert..! I decided to try it out on my Raspberry Pi400 instead of my Raspberry Pi Zero 2W. :-) It works like a charm. Thx so much for Ur help..! U've done an amazing job with that guide. :-)
[Please log in to post a comment]